Ir para o conteúdo principal

Alterações no passo nº 5

Edição por Chase Hemming

Edição aprovada por Chase Hemming

Antes
Depois
Sem alteração

Linhas do passo

-[* black] Use a plastic opening tool to gently pry the following connectors out of their sockets on the logic board:
- [* orange] Pry the LCD cable from the top right corner.
- [* blue] Pry the headphone jack cable from the top edge.
+[* black] Use the edge of a plastic opening tool to gently pry the two connectors out of their sockets.
+ [* orange] Pry the LCD cable connector from the top right corner.
+ [* blue] Pry the headphone jack cable connector from the top edge.