Alterações no passo nº 14
Edição por Liam Hedriana —
Edição aprovada por Liam Hedriana
- Antes
- Depois
- Sem alteração
Linhas do passo
| + | [title] 9V Battery Snap Connector |
|---|---|
| + | [* black] The 9V Battery Snap Connector is connected to motherboard via 2 wires: 1 red and 1 black. |
| + | [* black] The red wire is soldered to the left of the DC Adapter Port, and the black wire is soldered just below the single 1/4 inch line input jack. |
| + | [* black] To replace the 9V Battery Snap Connector, simply re-solder the connection in the back of the motherboard at these two points. |