Alterações no passo nº 2
Edição por Wesley Pate —
Edição aprovada por Wesley Pate
- Antes
- Depois
- Sem alteração
Linhas do passo
| + | [title] Remove the Sisterboard. |
|---|---|
| + | [* icon_caution] In this next step it is easy to pry the wrong piece. Make sure to pry at the metal platform that the sister board sits on, not the orange printed circuit board itself. |
| + | [* red] Using your prying tool, pry at the right red marked corner, making sure to pull at the metal platform under the circuit board. Once it is raised slightly, pull along the underside until the left red mark. This should loosen the board and allow it to be removed. |
| + | [* orange] If it's still unable to be removed, try to pry at the orange mark, making sure to pull at the same metal platform. |
Imagem 1
Nenhuma imagem anterior
Adicionado
Imagem 2
Nenhuma imagem anterior
Adicionado