Alterações no passo nº 4
Edição por Brett Hartt —
- Antes
- Depois
- Sem alteração
Linhas do passo
[* icon_note] For enough clearance to remove the hard drive, the logic board must be slightly removed. To accomplish this, two cylindrical rods must be inserted into the holes highlighted in red. | |
[* icon_caution] Inserting instruments into any logic board holes other than the ones highlighted in red may severely damage the logic board. | |
[* black] Insert a Mac Mini Logic Board Removal Tool into the two holes highlighted in red. Be sure it makes contact with the outer case below the logic board before proceeding. | |
[* icon_note] If you don't have a Logic Board Removal Tool handy, you can use two tools having a maximum diameter of 2.5 mm instead. Just insert one into each of the highlighted holes. | |
- | [* black] Carefully |
- | [* black] Cease prying when the I/O board is visibly separated from the outer case. Remove the |
+ | [* black] Carefully pull the tool toward the I/O board. The logic board and I/O board assembly should slightly slide out of the outer case. |
+ | [* black] Cease prying when the I/O board is visibly separated from the outer case. Remove the Mac Mini Logic Board Removal tool. |