Histórico do passo nº 2 do guia HP Slate 8 Pro Battery Replacement

	[title] Remove yellow cables
-	[* red] Use a spudger to release the black ~~clip~~ on the two ~~ZIF~~ connectors holding the yellow ~~ribbon~~ cable in place.
-	[* black] Use tweezers to pull the yellow ~~ribbon~~ cable out of its connectors.
-	[* orange] Use ~~tweezer~~ to disconnect the battery connector from the ~~motherboard~~.
-	[* yellow] ~~Use a~~ spudger to pry up the connectors on the ends of the orange ~~ribbon~~ cable.
-	[* black] Remove the orange ~~ribbon~~ cable.
+	[* red] Use a spudger tool to release the black clips on the two connectors holding the flat, yellow cable in place.
+	[* black] Use the tweezers to pull the flat, yellow cable out of its connectors.
+	[* orange] Use the tweezers to disconnect the battery connector from the circuit board.
+	[* yellow] Using the spudger tool again, pry up and release the connectors at the ends of the flat, orange cable.
+	[* black] Remove the flat, orange cable.