Alterações no passo nº 3
Edição por John Thress —
- Antes
- Depois
- Sem alteração
Linhas do passo
| [* icon_note] NOTE: This picture identifies the process required to release the electrical ribbons but not the proper location for this step. | |
| [* black] This step applies to the larger electrical ribbon connecting the LCD screen and circuit board. | |
| - | [* black] Using spudger, wedge the flat tipped end between the black bar and the circuit board. |
| - | [* black] |
| + | [* black] Using a spudger, wedge the flat tipped end between the black bar and the circuit board. |
| + | [* black] Carefully flip up black bar into vertical position. |