Ir para o conteúdo principal

Alterações no passo nº 2

Edição por Jeremy Coloretti

Edição aprovada por Jeremy Coloretti

Antes
Depois
Sem alteração

Linhas do passo

-[* red] Remove the four 7 cm Phillips #1 screws at each corner of the backside on the Atari Lynx.
+[* red] Remove the four 35 mm Phillips #1 screws at each corner of the backside on the Atari Lynx.
[* black] Pinch the rear panel with your fingers and lift away from the Atari.