Alterações no passo nº 3
Edição por KaylaYoung —
- Antes
- Depois
- Sem alteração
Linhas do passo
| - | [* black] Pry the phone display open by inserting a plastic opening into the crack that runs along the side of the phone display under the screws. |
|---|---|
| - | [* black] Once you have the display cover wedged open, use your fingers to pry the whole cover off the phone. |
| - | [* black] Some force may be needed to remove the cover, as several tabs are there which hold the two parts in place. Therefore, be careful when prying the cover apart |
| + | [* black] Pry the phone display open by inserting a plastic opening tool into the crack that runs along the side of the phone display under the screws. |
| + | [* black] Once you have the display cover wedged open, use your fingers to pry the whole outside cover off of the top half of the phone. |
| + | [* black] Some force may be needed to remove the cover, as several tabs are there which hold the two parts in place. Therefore, be careful when prying the cover apart. |
| + | [* black] Set the outside display cover aside. The two separate parts should look like the second picture. |