Histórico do passo nº 1 do guia Apple Studio Display M2454 USB port replacement

	[* black] The USB ports are located on the back side of the monitor, below the plastic cover and metallic panel; on the lower left hand side.
	[* black] The first step is to remove the plastic cover panel.
	[* black] To do so, remove the three 2mm hex screws on the monitor's stand, as well as the four 2mm hex screws located on the four corners of the back plastic cover panel.
-	[* ~~black~~] ~~With these screws removed~~ the ~~back~~ panels ~~can be~~ pulled through ~~the main cable and removed~~.
+	[* icon_caution] After removing the mentioned screws, it is possible to take off the panels and began examining the inner components. Make sure main cable i pulled through plastic port.
	[* black] For additional help removing the back panel, refer to the repair guide for the LCD Main Board.