Histórico do passo nº 1 do guia Apple Studio Display M2454 USB port replacement

	[* black] The USB ports are located on the back side of the monitor, below the plastic cover and metallic panel; on the lower left hand side.
-	[* black] ~~First,~~ the ~~back panels must be removed to access the port~~.
-	[* black] To do so, remove the three 2mm hex screws on the monitor's stand ~~and~~ the four 2mm hex screws located on the corners of the back panel ~~as well~~.
+	[* black] The first step is to remove the plastic cover panel.
+	[* black] To do so, remove the three 2mm hex screws on the monitor's stand, as well as the four 2mm hex screws located on the four corners of the back plastic cover panel.
	[* black] With these screws removed the back panels can be pulled through the main cable and removed.
	[* black] For additional help removing the back panel, refer to the repair guide for the LCD Main Board.