Alterações no passo nº 2
Edição por Nicolas Siemsen —
Edição aprovada por Nicolas Siemsen
- Antes
- Depois
- Sem alteração
Linhas do passo
| - | [* black] Before you begin, you'll need to remove your door panels on the doors affected. See the door panel removal technique guide. |
|---|---|
| - | [* black] After removing your door panel you'll find the actuator attached to the bottom panel of the door. There will be two vacuum lines entering it, and a rod connecting it to an armature of the lock mechanism. |
| + | [* black] After removing your door panel you'll find the actuator attached to the bottom edge of the door. There will be two vacuum lines entering it, and a rod connecting it to an armature of the lock mechanism. |
| [* red] Use a screw driver to remove the c-clip that is holding the rod to the metal cross-piece on the actuator. Be careful to save the c-clip someplace safe. |