Alterações no passo nº 7
Edição por Nicolas Siemsen —
Edição aprovada por Nicolas Siemsen
- Antes
- Depois
- Sem alteração
Linhas do passo
| [* black] The best way to remove the diaphragms is to firmly squeeze the soft portion between the upper metal portion and the plastic actuator body. | |
| [* black] Pry in one direction, and once the diaphragm is released at one edge it can be pulled off entirely. | |
| [* black] Inspect the inside of the actuator body and clean if necessary. | |
| + | [* black] Replace the diaphragms with the new ones, and coat lightly with synthetic grease like the dielectric grease used for spark plugs; this will help preserve the rubber. |