Alterações no passo nº 6
Edição por Colin Mitchell —
Edição aprovada por Colin Mitchell
- Antes
- Depois
- Sem alteração
Linhas do passo
| + | [* black] Insert the metal screwdriver as pictured: oriented vertically, underneath the yellow plastic piece in the switch assembly, between the metal contact of the switch and the gray plastic slider flange. |
|---|---|
| + | [* black] Pry upward to remove the yellow plastic piece; the metal contact piece may pop out with the plastic piece. |
| + | [* black] Once the metal and plastic are unseated from one side, pull out the metal contact and yellow plastic piece with pliers or fingers. Remove these pieces. |
Imagem 1
Nenhuma imagem anterior
Adicionado