Alterações no passo nº 2
Edição por MarkAnthony —
Edição aprovada por MarkAnthony
- Antes
- Depois
- Sem alteração
Linhas do passo
| - | [* black] Using a flat edge (such as a spundger or a |
|---|---|
| + | [* black] Using a flat edge (such as a spundger or a flathead screwdriver) remove the C-clamp from the center spindle by wedging your flat edge between the platter and the C-clamp. |
| [* icon_caution] The C-clamp may pop off unexpectedly, so be careful it doesn't fall somewhere hard to reach. | |
| [* icon_note] The C-clamp holds the platter in place. With it removed, you can now lift the platter up off of the spindle. |