Alterações no passo nº 3
Edição por teenage engineering —
Edição aprovada por teenage engineering
- Antes
- Depois
- Sem alteração
Linhas do passo
| - | [* black] Lift Flex connector and place the new Connector Board by inserting it connector side first, and then pressing down on opposite side. |
|---|---|
| + | [* black] Lift Flex connector and place the new Connector Board, by inserting it connector side first, and then pressing down on opposite side. |
| [* black] Fasten flex connector and screws. Remember the washer on the screw closest to the connector. | |
| [* black] Snap fit the back panel in place. | |
| [* black] Done! |