Alterações no passo nº 2
Edição por teenage engineering —
Edição aprovada por teenage engineering
- Antes
- Depois
- Sem alteração
Linhas do passo
| - | [* black] Remove Connector Board Remove screws, 3 Disconnect flex connector Lift connector board Attach Connector Board Place power switch cap Place connector board Attach flex connector Function Test: Verify power / mic / connectors / USB. Attach Back Panel Attach screws, 3 Place serial number sticker Attach back panel |
|---|---|
| + | [* black] ***Remove Connector Board*** |
| + | [* black] Remove the 3 screws. |
| + | [* black] Disconnect the flex connector. |
| + | [* black] Lift the Connector Board. |