Ir para o conteúdo principal

Alterações no passo nº 14

Edição por Mark

Edição aprovada por Mark

Antes
Depois
Sem alteração

Linhas do passo

+[* black] Since cooling is such an issue with this notebook, if you take the heat sync off of the processor and the graphics card, ***use fresh thermal paste*** and ***remove the old thermal paste*** on the two parts. It's that greyish residue on the chips. It's not unreasonably expensive and it can really help with cooling issues
+[* black] You may want to look at a ***separate guide for applying and removing thermal paste***, it's not entirely complicated but you don't want to make a mess of your work and need to ***redo it later***
+[* black] Hopefully once you put it all back together, your DV7 provides you with years of valuable service. ***Just remember not to over-tighten screws*** so that if you have to do it again, there's still enough thread to get your screwdriver in there!