Alterações no passo nº 6
Linhas do passo
| + | [* black] After removing the screws securing the keyboard, you will need to flip the ***keyboard release switch*** to the left (in previous step). You should feel the release slightly make the switch less springy |
|---|---|
| + | [* black] There are still clips on the sides of the keyboard holding it in, so you may need a prying tool to remove the keyboard (eg. spudger, guitar pick). This shouldnt be too hard |
| + | [* icon_caution] Since the keyboard is made of relatively flimsy metal, you may find that if you pull too hard you can bend the keyboard. It's usually correctable though. |
| + | [* red] Don't completely pull out the keyboard as there is a ***large ribbon cable*** connecting the keyboard to the case. To remove this, flip the white part of the ***motherboard connector*** UP. This will allow easy removal of the ribbon cable |
Imagem 1
Nenhuma imagem anterior
Adicionado
Imagem 2
Nenhuma imagem anterior
Adicionado
Imagem 3
Nenhuma imagem anterior
Adicionado