Alterações no passo nº 2
Linhas do passo
| + | [* black] Start by flipping the laptop on its front cover. As you can see from mine, it's not difficult to scratch up the surface so I'd recommend putting a cloth or cupboard protector underneath |
|---|---|
| + | [* black] The first step is to remove the middle section housing the ***hard drive, wireless card, and ram*** |
| + | [* icon_caution] ***BEFORE YOU START*** - Make sure the battery is removed, and the unit is unplugged. It's also advised to wear an ***anti-static wrist strap*** or at least ground yourself |
| + | [* red] There are 5 anchored screws (they don't come all the way out) that need to be loosened |
| + | [* black] There is a small ridge just below the battery that helps in removing the cover. I used a ***spudger*** but if you don't have one, a small flathead screwdriver will work. Or a hard guitar pick. |
| + | [* black] Pry from the top - you'll notice small clips on the edges that hold it in place. They may require a little bit of force. Once you get to the bottom, just pull ***north*** as the clips on the bottom are larger. |
Imagem 1
Nenhuma imagem anterior
Adicionado
Imagem 2
Nenhuma imagem anterior
Adicionado