Alterações no passo nº 2
Edição por Luke Butzow —
Edição aprovada por Luke Butzow
- Antes
- Depois
- Sem alteração
Linhas do passo
| [* black] Set the nut and washers aside | |
| - | [* |
| + | [* black] remove the bearings and spacer by pushing/prying them out against the trucks |
| [* icon_note] Place the tip of the truck into the bearing, firmly grip the wheel, push down and rotate outward to remove each bearing. Keep track of the spacer that is in between the bearings during removal. |