Alterações no passo nº 2
Edição por KyreseAguilar —
Edição aprovada por KyreseAguilar
- Antes
- Depois
- Sem alteração
Linhas do passo
| [* red] Unscrew the 2 screws circled in red with the TR10 screwdriver. The screw lengths are also 1cm long. | |
| [* icon_note] Almost all screws are the same length (around 1 cm). The main difference is the bit that's used to remove them. | |
| [* yellow] Using the Phillips 1 screwdriver, unscrew the 4 screws circled in yellow. This will make the fan holder slightly loose, but this will not be a problem until you open the case completely. | |
| [* black] This will allow the top of the case to be opened later. | |
| - | [* black] Move on to Step 3 |