Alterações no passo nº 1
Edição por Francis Mora —
Edição aprovada por Francis Mora
- Antes
- Depois
- Sem alteração
Linhas do passo
| - | [* red] Unscrew the singular 1cm |
|---|---|
| + | [* red] Unscrew the singular 1cm screw holding the grate at the top using the TR10 screwdriver. |
| [* yellow] Using the prying tool, carefully work along the outer edges to remove the inner clamps to remove the grate. | |
| [* icon_note] These clamps can be difficult to remove, but releasing 2 clamps on the same side should allow you to easily remove the grate. | |
| [* black] Set aside the grate, as this will be one of the last steps for reassembly. |