Alterações neste passo
Edição por Garrett Denham —
Edição aprovada por Garrett Denham
- Antes
- Depois
- Sem alteração
Linhas do passo
| [* black] Unscrew the singular screw holding the grate at the top using the Phillips #1 Screwdriver. Next, unscrew all of the marked screws within the device. | |
| - | [* black] ***WARNING:*** There are two clamps within the grate and you must unclasp them carefully using the blue ifixit opening tool. |
| + | [* icon_caution] ***Careful:*** There are two clamps within the grate and you must unclasp them carefully, using the an opening tool of some sort. |
| + | [* black] After removing the grate, ***the screen should still be attached***, but can be unscrewed using the Phillips head screwdriver. |
| + | [* black] The screws on the side of the case are meant to hold the case together and need to be removed so that the case can be opened. |
| + | [* black] The screws connected to the top part of the fan need to be removed as well, as this allows the case to be opened/separated for later guides. |