Alterações no passo nº 25
Edição por Spencer Pennington —
Edição aprovada por Spencer Pennington
- Antes
- Depois
- Sem alteração
Linhas do passo
| - | [* icon_note] The gear you remove in this step has a [link|https://guide-images.cdn.ifixit.com/igi/GQHaXj4CIEfsp55u.full|small cap|new_window=true] at its bottom that will fall off when you slide the gear out of the bracket. |
|---|---|
| + | [* icon_note] The gear you remove in this step has a [link|https://guide-images.cdn.ifixit.com/igi/GQHaXj4CIEfsp55u.full|small cap|new_window=true] at its bottom that will fall off when you slide the gear out of the bracket. Be careful not to lose it. |
| [* black] With one hand holding the motor, use your other hand to remove the gear from the motor bracket. | |
| - | [* icon_note] This |
| + | [* icon_note] This part can be tricky. Adjust the motor and pull the gear at different angles until it comes free. |
| [* black] As the gear comes free of the bracket, lift the gear out of the belt. | |
| [* icon_reminder] During reassembly: | |
| [* black] Thread the belt through the opening in the motor bracket. | |
| [* black] Insert the smaller part of the gear into the belt and replace the cap on the bottom of the gear. | |
| - | [* black] Hold the gear, belt, and cap in place as you |
| + | [* black] Hold the gear, belt, and cap in place as you place the gear into the motor bracket. |