Alterações no passo nº 1
Linhas do passo
| [* black] Flip over the cup warmer so that the underside is facing up. | |
| [* black] You will see four small rubber nonslip pads. To disassemble the cup warmer, you need to unscrew the screws that are under each pad. | |
| [* red] To expose the screws, use either your fingers, a screwdriver, or any other long, flat object to lift and peel away the rubber pads. | |
| - | [* orange] Using a #2 Phillips screwdriver, unscrew each of the four screws. |
| + | [* orange] Using a #2 Phillips screwdriver, unscrew each of the four 1cm screws. |
| [* black] Flip over the cup warmer so that the top side is facing up, then lift away the front plate. |