Alterações no passo nº 10
Edição por Spencer Pennington —
Edição aprovada por Spencer Pennington
- Antes
- Depois
- Sem alteração
Linhas do passo
| + | [* icon_caution] The roller bar motor assembly includes a [link|https://guide-images.cdn.ifixit.com/igi/fpUObJvic2Ptqe1t.full|pin that goes through a gear|new_window=true] and into the frame of the Cricut. Pull the assembly straight out to avoid bending this pin. |
|---|---|
| [* black] Grab the roller bar motor assembly and move it out of the way. | |
| + | [* icon_note] The gear behind the roller bar motor assembly is lubricated with white lithium grease. Try to avoid touching the grease. |
| + | [* icon_reminder] During reassembly, make sure the pin in the motor assembly goes through the gear and [link|https://guide-images.cdn.ifixit.com/igi/P6EJJm4JD43jmGTc.full|into the hole in the frame|new_window=true]. |