Alterações no passo nº 3
Edição por Jack Pateracki —
Edição aprovada por Jack Pateracki
- Antes
- Depois
- Sem alteração
Linhas do passo
| + | [title] SLIGHTLY lift the top of the warmer to disconnect the connector circled in the photo. |
|---|---|
| + | [* black] The white cable is taped to the side of the warmer. If you pull the top of the warmer out too far, don't worry. You can easily tape it back in place later on. |
| + | [* black] You will need to press down on the latch on the connector in order to remove it. Do NOT put a lot of pressure on the connector. |
Imagem 1
Nenhuma imagem anterior
Adicionado