Alterações neste passo
Edição por Walter Galan —
Edição aprovada por Walter Galan
- Antes
- Depois
- Sem alteração
Linhas do passo
| - | [* black] Locate the adhesive strips for the home button control board. |
|---|---|
| - | [* black] Grasp the appropriate adhesive strip with a pair of tweezers and carefully align and lay it down. |
| + | [* icon_note] The two small notched trapezoidal strips will be used to attach the home button bracket to the front panel. |
| + | [* black] Carefully peel off the first trapezoidal adhesive strip with a pair of tweezers. |
| + | [* black] Using a pair of tweezers, place the first trapezoidal adhesive strip (minding its correct orientation) on the matching side of the home button mounting bracket. |
| + | [* icon_note] Make sure to line up the profile of the strip with the edge of the mounting bracket. |
| + | [* icon_reminder] Repeat the procedure for the second trapezoidal adhesive strip. |