Histórico do passo nº 2 do guia JBL Tune 510BT Headphone Speaker Driver Replacement

-	[* black] ~~Identify~~ the ~~two~~ wires ~~and remove them~~ from the driver carefully.
+	[* black] Remove the 2 wires from the driver carefully.
	[* black] Orientate your new driver and solder the wires to it.
	[* icon_note] Be sure to solder the wires to the correct terminals and confirm that the wires aren't crossed.
-	[* black] Replace the repaired driver in the housing
+	[* black] Replace the repaired driver in the housing.