Alterações no passo nº 1
Edição por Kristen Gismondi —
Edição aprovada por Kristen Gismondi
- Antes
- Depois
- Sem alteração
Linhas do passo
| - | [* red] Pull each of the 3 pull tabs away from the center of the faceplate, disengaging them and exposing the back of the speaker driver. |
|---|---|
| - | [* black] Push your Jimmy or other pry tool gently between the driver and the grey spacer. Lift gently until the driver is loose. Be mindful not to damage the wires connecting to the driver. |
| + | [* red] Pull each of the three pull tabs away from the center of the faceplate, disengaging them and exposing the back of the speaker driver. |
| + | [* black] Push a Jimmy or other pry tool gently between the driver and the grey spacer. |
| + | [* black] Lift gently until the driver is loose, being mindful not to damage the wires connecting to the driver. |