Alterações no passo nº 1
Edição por Noah Dela Calzada —
Edição aprovada por Noah Dela Calzada
- Antes
- Depois
- Sem alteração
Linhas do passo
| [* black] Tilt the hole puncher on it's back to get a better angle on the 3 screws. | |
| - | [* red] 3 flat head screws |
| - | [* black] Pick a screw to start with and use a screwdriver with a flat head attachment to unscrew it. |
| - | [* black] Repeat these steps with the other screws. |
| - | [* icon_caution] keep track of your screws, you will need them later. |
| + | [* red] Use a screwdriver with a flat head attachment to unscrew one of the 3 flat head screws. |
| + | [* black] Repeat this step with the other screws. |
| + | [* icon_caution] Keep track of your screws, you will need them later. |