Alterações no passo nº 4
Edição por Maria Lozada Gobelli —
Edição aprovada por Maria Lozada Gobelli
- Antes
- Depois
- Sem alteração
Linhas do passo
| [title] Replace the zip slider | |
| [* black] Remove any pullers/toggles/fasteners from the zipper puller, and set them aside. These can be reused later. | |
| [* black] Find a new slider, matching with the zip tape size. Craft shops, sewing shops, or even second-hand shops are great places to find these. | |
| - | [* black] ***Tip: ***to determine the zipper puller size, check for the number on the backside. For more information, check out the iFixit guide [[Plastic Tooth Zipper |
| + | [* black] ***Tip: *** to determine the zipper puller size, check for the number on the backside. For more information, check out the iFixit guide [[Plastic Tooth Zipper Size|Plastic Tooth Zipper Size|new_window=true]] |
| [* black] Take your new zipper puller, and insert it back onto the zip from the topside... | |
| [* black] ... and pull it down to the middle of the zip. |