Ir para o conteúdo principal

Alterações no passo nº 2

Edição por Dayanna E.

Edição aprovada por Dayanna E.

Antes
Depois
Sem alteração

Linhas do passo

[* red] With your preferred tool ,( given chin rest key, thick paper clip, thick bobby pin), ***Insert your tool's tip inside a hole in your current violin chin rest.***
[* red] There are ***4 holes in total. ***Starting with either left/right or bottom/top hole works either way. With that said, ***the left hole section is different from the right hole section.***
- [* icon_caution] ***Please make sure to carefully insert your tool's tip and not stratch your instrument by sticking it through the holes too far.***
+ [* icon_caution] ***Please make sure to carefully insert your tool's tip and not scratch your instrument by sticking it through the holes too far.***
[* red] ++***Important Repeated Action Required:*** ++Continuously twist your tool in choosen hole towards the ***left (loosey)*** or ***right (tighty)***
[* red] ***If you are attempting to remove your current shoulder rest, please twist towards the left as shown in the picture.*** Otherwise, twist towards the right when/if attempting to put back your chin rest.