Alterações no passo nº 2
Edição por Timothy Marroquin —
Edição aprovada por Timothy Marroquin
- Antes
- Depois
- Sem alteração
Linhas do passo
| - | [* red] Using the Phillips head screwdriver, remove the screws in the center of the Harmonica holding the reed plates in place and set these aside. |
|---|---|
| + | [* red] Using the Phillips head screwdriver, remove the 11mm Phillips #1 screws in the center of the Harmonica holding the reed plates in place and set these aside. |
| [* black] Separate the reed plates from the comb and set the comb aside. | |
| [* icon_note] Note the orientation of the reeds and which direction they face as you you set them aside. Referencing how they align with the comb will also be helpful when putting everything back together. |