Alterações no passo nº 1
Edição por Kendra Ledlow —
Edição aprovada por Kendra Ledlow
- Antes
- Depois
- Sem alteração
Linhas do passo
| - | [* black] Place the ratcheting socket wrench opening on the 13mm hexagonal bolt, then turn counter clockwise to loosen. Do this step for each of the two (2) bolts holding the rod in place. |
|---|---|
| + | [* black] Place the ratcheting socket wrench opening on the 13mm hexagonal bolt, then turn counter clockwise to loosen and remove the bolt. Do this step for each of the two (2) bolts holding the rod in place. |
| [* black] Once the bolts are removed, slide the rod out from behind the handle. |