Alterações no passo nº 6
Edição por Jake Devincenzi —
Edição aprovada por Jake Devincenzi
- Antes
- Depois
- Sem alteração
Linhas do passo
| [* black] Lift the display for enough clearance to disconnect the LCD thermal sensor cable connector from its socket on the logic board. | |
| - | [* icon_note] If your fan is spinning full speed after completion, check this connection or the hard drive's thermal sensor cable. The thermal sensor connector socket is very fragile so be very careful when you connect back the sensor cable |
| + | [* icon_note] If your fan is spinning full speed after completion, check this connection or the hard drive's thermal sensor cable. The thermal sensor connector socket is very fragile, so be very careful when you connect back the sensor cable. |