Ir para o conteúdo principal

Conserte seus objetos

Direito de executar reparos

Loja

Alterações no passo #6

Edição por j74656

Edição aprovada por Jake Devincenzi

Antes
Depois
Sem alteração

Linhas de Passo

[* black] Lift the display for enough clearance to disconnect the LCD thermal sensor cable connector from its socket on the logic board.
[* icon_note] If your fan is spinning full speed after completion, check this connection or the hard drive's thermal sensor cable. The thermal sensor connector socket is very fragile so be very careful when you connect back the sensor cable!
[* icon_note] If your fan is spinning full speed after completion, check this connection or the hard drive's thermal sensor cable. The thermal sensor connector socket is very fragile so be very careful when you connect back the sensor cable!