Ir para o conteúdo principal

Alterações no passo nº 3

Edição por Juan Chavez

Edição aprovada por Juan Chavez

Antes
Depois
Sem alteração

Linhas do passo

-[* black] Tools:
- [* red] Wire cutter or sharp scissors
[* black] Locate the excess length of wires inside the bass.
[* black] These are most likely right under the bridge of the bass.
-[* black] You will want to cut the zip tie holding these wires in place.
+[* red] You will cut the zip tie holding these wires in place.
[* black] This will allow us to disassemble all parts the wires are connected to later.