Alterações no passo nº 5
Edição por Henry Peeples —
Edição aprovada por Henry Peeples
- Antes
- Depois
- Sem alteração
Linhas do passo
| - | [* black] Desolder old wires from control board, desoldering is the process of removing old wires from a control board by melting the solder that holds them in place. This is usually done when replacing old or damaged wires, or when making modifications to the control board. Here are the steps to desolder old wires from a control board: |
|---|---|
| [* black] Remove connections from both read and green bundles. There should be 3 separate wires per bundle that need to be removed. |