Alterações no passo nº 2
Edição por Haylie Rayl —
Edição aprovada por Haylie Rayl
- Antes
- Depois
- Sem alteração
Linhas do passo
| - | [* black] Using your flat blade knife, score the back of the baseboard. To score the baseboard, take the sharp end of the knife and slice off remaining large chunks of adhesive. Ensure to not cut pieces of rubber from the board. Repeat for the wall. This is to remove any viscous material that is still clung to the baseboard or wall. |
|---|---|
| - | [* icon_caution] Handling a sharp flat blade knife can be dangerous due to how sharp the end may be. Make sure to watch which way you score with the blade and to cut away from your body/fingers. |
| + | [* black] Using the flat blade knife, slice off the remaining adhesive on both the baseboard and the wall. |
| + | [* icon_note] Be careful to not cut pieces of rubber from the board. |
| + | [* icon_caution] Handling a sharp flat blade knife can be dangerous due to how sharp the end may be. Make sure to watch which way you cut with the blade and to cut away from your body/fingers. |