Pular para o conteúdo principal

Alterações no passo #2

Edição por johann beda

Edição recusada por Adam O'Camb

Excluído
Adicionado
Sem alteração

Linhas de Passo

[* black] Unplug the left speaker cable from its socket on the logic board. Be sure to pull straight up out of the socketsocket, parallel with the board towards the top of the iMac.
[* black] Unplug the left speaker cable from its socket on the logic board. Be sure to pull straight up out of the socketsocket, parallel with the board towards the top of the iMac.
[* black] De-route the cable from the gap between the hard drive and logic board.
[* icon_note] If the gap between the hard drive and logic board is too narrow for the speaker cable, disconnect it and leave the cable in place.