Alterações no passo nº 1
Edição por Aayma Mughal —
Edição aprovada por Aayma Mughal
- Antes
- Depois
- Sem alteração
Linhas do passo
| - | [* red] Turn unit on its front and remove the indicated screws using Philips #2 screwdriver. |
|---|---|
| - | [* orange] The orange marker indicates the screw that holds the handle in place. |
| + | [* red] Turn unit on its front and remove the indicated screws using Philips #2 screwdriver. |
| + | [* orange] The orange marker indicates the screw that holds the handle in place. Remove to pull the handle out. |
| [* yellow] Remove the two screws on the underside of the mop where the mop head is connected. | |
| [* green] The mop head connector can be pulled off revealing two final screws. Remove the screws and the bottom portion of the front housing of the mop can be pulled off. |