Alterações no passo nº 1
Edição por Dylan Norris —
Edição aprovada por Dylan Norris
- Antes
- Depois
- Sem alteração
Linhas do passo
| - | [* black] Use the phillps size to hold the skrew in place, while using the socket side to loosen the nut |
|---|---|
| - | [* black] Repeat on all 4 nuts on both trucks |
| - | [* black] Remove the trucks, nuts, and screws and keep them to the side |
| + | [* black] Use the 3/8" socket to take off the nut |
| + | [* icon_note] Use the phillips side to hold the screw in place. |
| + | [* black] Remove the nut |
| + | [* black] Repeat for all 4 nuts |
| + | [* black] Remove the truck and screws |
| + | [* black] Repeat for the second truck |