Alterações neste passo
Edição por Devyn White —
Edição aprovada por Devyn White
- Antes
- Depois
- Sem alteração
Linhas do passo
| + | [* black] After removing the screws, you will want to turn the device around, so that the back end is facing you. |
|---|---|
| + | [* black] Once you have the back end facing you, you will want to locate the cylindrical connectors from the Top Door to the device. To locate these connectors, you will want to look for the small rectangles along the backside of the device. For every two rectangles, there is one cylindrical connector in between the two. |
| + | [* black] To remove the Top Door, wedge one or two iFixit opening picks within the seam connecting the Top Door to the device, and use the iFixit opening tool to pry in an upwards motion along the seam. These actions should reveal the cylindrical connectors. |
Imagem 1
Nenhuma imagem anterior
Adicionado
Imagem 2
Nenhuma imagem anterior
Adicionado
Imagem 3
Nenhuma imagem anterior
Adicionado