Histórico do passo nº 2 do guia Cricut Maker Top Door/ Lid Replacement

-	[* black] ~~Upon~~ the ~~removal of the joint cover, you will be presented with~~ four, 1/4" screws holding the lid to the joint.
-	[* black] ~~Once you have located~~ the ~~screws~~, ~~proceed to use~~ the ~~TR8 Torx Security Screwdriver to unscrew them~~.
-	[* black] ~~You will want to remove~~ these from the joint and set them aside.
+	[* black] Highlighted are the four, 1/4" 10mm screws holding the lid to the joint.
+	[* black] Unscrew the 4, 10mm TORX T8H screws holding the lid in place.
+	[* black] Remove these from the joint and set them aside.