Ir para o conteúdo principal

Alterações no passo nº 2

Edição por Andrew Optimus Goldheart

Edição aprovada por Andrew Optimus Goldheart

Antes
Depois
Sem alteração

Linhas do passo

-[* icon_caution] To avoid damaging its socket, do not lift the end of the SSD excessively.
-[* black] Slightly lift up the end of the SSD and pull it straight out of its socket on the logic board.
+[* black] Gently lift the end of the SSD about half an inch and pull it straight out of its socket on the logic board.
+ [* icon_caution] Don't lift the SSD more than half an inch—doing so may damage the SSD or its socket on the logic board.
[* icon_reminder] When reinstalling the SSD, be sure it is properly seated before reinstalling its retaining screw.