Alterações no passo nº 23
Edição por Chayton Ritter —
Edição aprovada por Chayton Ritter
- Antes
- Depois
- Sem alteração
Linhas do passo
| [* icon_caution] In the following step you'll be very carefully prying up the logic board. The place to lift it is very tight. Avoid damage to the bottom interconnect board by making sure you are not prying against it. | |
| [* black] Insert the flat end of your spudger between the logic board and the frame of the iPad. | |
| [* black] Use your spudger to slowly pry up the bottom of the Logic Board. | |
| - | [* icon_note] If the adhesive is still too strong to pry up the |
| + | [* icon_note] If the adhesive is still too strong to pry up the Logic Board, apply some additional solvent and give it time to penetrate. |
| [* black] Lift up the Logic Board and replace the playing card battery blocker with an opening pick. |