Alterações no passo nº 20
Edição por Chayton Ritter —
Edição aprovada por Chayton Ritter
- Antes
- Depois
- Sem alteração
Linhas do passo
| [title] Apply isopropyl alcohol to the left edge of the logic board | |
| - | [* icon_note] The adhesive that secures the logic board is very strong. To remove the board, |
| + | [* icon_note] The adhesive that secures the logic board to the frame is very strong. To remove the board, follow the next steps to weaken the adhesive using high-strength (>90%) isopropyl alcohol. |
| [* black] Elevate the left side of the iPad so that it lays down at an angle. | |
| - | [* black] Apply isopropyl alcohol along the left edge of the logic board. |
| + | [* black] Apply a few drops of isopropyl alcohol along the left edge of the logic board. |
| + | [* icon_caution] Be careful if you're using a syringe with a needle or other sharp instrument to dispense isopropyl alcohol—a punctured or bent battery may leak dangerous chemicals or cause a fire. |
| + | [* black] Let the alcohol soak for one minute to soften the adhesive under the logic board. |