Ir para o conteúdo principal

Alterações no passo nº 2

Edição por Oksana Leksunkin

Edição aprovada por Oksana Leksunkin

Antes
Depois
Sem alteração

Linhas do passo

-[* black] Remove the plastic piece from the body of the laptop so that you can now see the two speakers in each corner.
-[* red] Using a Phillips #1 screwdriver, unscrew two 3mm screws located at the top corners of the keyboard. (Labeled in picture 2 in this step section.)
+[* black] Completely remove the plastic piece from the body of the laptop.
+[* red] Using the Phillips 1 screwdriver, unscrew the two 3mm screws located at the top corners of the keyboard. (See the second picture for additional clarification.)