Alterações no passo nº 6
Edição por Cooper Schroeder —
Edição aprovada por Cooper Schroeder
- Antes
- Depois
- Sem alteração
Linhas do passo
| - | [* |
|---|---|
| + | [* red] Flipping the drone over, use a soldering kit to remove the power cables from the logic board. |
| [* icon_note] Make certain that the solder being removed is connected to the prop arm being replaced by tracing the wire connections. | |
| - | [* black] If new to soldering a helpful guide can be found at [[Topic:Soldering]] |
| + | [* black] If new to soldering, a helpful guide can be found at [[Topic:Soldering]] |